# Bitvis VIP RGMII

**URL:** https://forum.uvvm.org/c/vvc/bitvis-vip-rgmii/25.md

[Latest](https://forum.uvvm.org/latest.md) · [Categories](https://forum.uvvm.org/categories.md) · [Tags](https://forum.uvvm.org/tags.md)

---

## [About the Bitvis VIP RGMII category](https://forum.uvvm.org/t/about-the-bitvis-vip-rgmii-category/191)

<div class="topic-metadata">

**Author:** [@Marius](https://forum.uvvm.org/u/Marius)\
**Replies:** 0

</div>

---

## [Is there any possible method to print recieve data frame after rgmii\_expect() in RGMII VVC?](https://forum.uvvm.org/t/is-there-any-possible-method-to-print-recieve-data-frame-after-rgmii-expect-in-rgmii-vvc/359)

<div class="topic-metadata">

**Author:** [@stsecen](https://forum.uvvm.org/u/stsecen)\
**Replies:** 3\
**Last updated:** [September 16, 2023, 11:06am UTC](https://forum.uvvm.org/t/is-there-any-possible-method-to-print-recieve-data-frame-after-rgmii-expect-in-rgmii-vvc/359 "2023-09-16T11:06:30Z")

</div>

Hi, the receive data is not same as expected in my design. I need to print the recieve frames to transcript. Is there any possible method to print recieve data frame after rgmii\_expect() in RGMII VVC? The code is shown …

---

## [RGMII VVC UDP Packet](https://forum.uvvm.org/t/rgmii-vvc-udp-packet/280)

<div class="topic-metadata">

**Author:** [@fmlkc](https://forum.uvvm.org/u/fmlkc)\
**Replies:** 1\
**Last updated:** [March 14, 2022, 1:45pm UTC](https://forum.uvvm.org/t/rgmii-vvc-udp-packet/280 "2022-03-14T13:45:31Z")

</div>

Hi everyone, I want to use RGMII VVC to verify ethernet UDP packet tranmistted from DUT. Bitvis Ethernet VIP does not support RGMII physical interace that’s why I use RGMII VVC. How can I customize RGMII VVC to check UD…